Which interface to choose?

there are three types of electronics:

1 type :

STD - standard series for home use

     -brand electronics FTDI
    - 3m long cable
    - 3x LED signaling in the housing: transmitting / receiving / ready to work
   -  support for all functions of LPG controllers

Due to the lack of additional protection systems against the harmful effects of HV interference (high voltage), the series of standard interfaces is recommended only for domestic applications. We recommend the FTDI and OPTO series models for workshops where there is a possibility of unintentional confusion of the connector.

2 type

FTDI - a professional series of interfaces with protection against reverse polarity and the effects of HV on transmission lines

     -brand electronics FTDI
   -  interface resistance even in the event of a mistake while connecting
   -  resistance of transmission lines to interference from the HV system
   -  4m cable
   -  3x LED signaling in the housing: transmitting / receiving / ready to work
    - support for all functions of LPG controllers

FTDI series LPG interfaces can be successfully used for continuous workshop operation. You do not have to worry about interference up to 20kV, even if we accidentally mistake the terminal and connect our interface incorrectly, in 90% of cases nothing bad should happen.

3 type :

OPTO (OPTO & FTDI) - professional series with the highest degree of protection and additional galvanic separation

     -brand electronics FTDI
     interface resistance even in the event of a mistake while connecting
    - resistance of transmission lines to interference from the HV system
     -4.5 m cable
    - GALVANIC SEPARATION - protection of transmission lines and interface ground
    - Complete separation of USB from vehicle installation circuits
     -3x LED signaling in the housing: transmitting / receiving / ready to work
     -support for all functions of LPG controllers

have a question, write lpgtech.co.uk@gmail.com